Kenmore 116.22822 - Manual (Page 8)

A
WARNING
Personal Injury and Product Damage
Hazard
* 00 NOT plug in if switch is in ON
position. Personal injury or
damage could result
* The cord moves rapidly when
rewinding. Press cord rewind
with foot only. Keep children away
and provide a clear path when
rewinding the cord to prevent
personal injury.
* DO NOT use outlets above
counters. Damage from cord to
items in surrounding area
could occur.
Cord
Rewind
Button
1. Pull cord out of canister to desired length.
The cord will not rewind until the cord
rewind button is pushed.
NOTE: To reduce the risk of electric shock,
this vacuum cleaner has a polarized plug:
one blade is wider than the other. This plug
will fit in a polarized outlet only one way. If
the plug does not fit fully in the outlet,
reverse the plug. If it still does not fit, con­
tact a qualified electrician to install the prop­
er outlet. Do not change the plug in any way
.2. Plug the polarized power cord into a 120
Volt outlet located near the floor.
To rewind: Unplug power cord. Hold the
plug while rewinding to prevent damage to
the cord plug or injury from the moving
cord. Push cord rewind button down to
retract cord.
Pile Height
indicator
Models)
Handle
Release
Pedal
Pile Height Pedal
(Some Models)
3. Lower wand from upright position by
pressing the handle release pedal.
A
CAUTION
DO NOT leave the Power-Mate®
running in one spot in the upright
position for any length of time.
Damage to carpet may occur.
4. Select a pile height setting by pressing
the small pedal on the rear of the Power­
Mate*. The pile height setting shows on the
indicator. See SUGGESTED PILE HEIGHT
SETTINGS.
Attention: Refer to your carpet manufec-
turers cleaning recommendations. Some
more delicate carpets may require that they
be vacuumed with the Power-Mate® agitator
turned off, to prevent carpet damage.
5. Select an Electronic Touch Control posi­
tion on the handle depending on the type of
vacuuming you will be doing.