Kenmore 116.22822 - Manual (Page 19)

1. Remove Power-Male® cover as shown in
BELT CHANGING AND AGITATOR CLEAN­
ING section.
2. Push in and turn
bulb counterclock­
wise, then pull out
to remove.
3. To replace bulb,
push in and turn new
bulb clockwise. Bulb
must not be higher
than 15Watts(130
Volts).
4. Reinstall Power-Mate cover as shown in
BELT CHANGING AND AGITATOR
CLEANING section.
NOTE: See PARTS AND FEATURES
for the bulb number
A WARNING
Electrical Shock Or Personal Injury
Hazard
Disconnect electrical supply before
servicing or cleaning the unit.
Failure to do so could result in elec­
trical shock or personal injury from
cleaner suddenly starting.
TO CHECK BRUSHES
Base Support Bars
When brushes
are worn to the
level of the base
support bars,
replace the
agitator.
TO REPLACE AGITATOR
ASSEMBLY
1. Remove Power-Mate®Vx)ver, agitator
cover, belt and agitator assembly. See “To
Remove Belt" in BELT CHANGING AND
AGITATOR CLEANING.
2. Replace agitator assembly.
3. Reinstall belt, agitator assembly, agitator
cover and Power-Mate® cover. See “To
replace belf in BELT CHANGING AND
AGITATOR CLEANING.
19