Caution, Warning, Ecl^cliànging'àno’kci'm^ clsani – Kenmore 116.22822 User Manual

Page 17: Exploded view agitator assembly

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Always follow all safety precautions when
cleaning and servicing the Power-Mate*’.

A

CAUTION

When you remove the end caps, a

small metal washer on each end
may come off. DO NOT lose these

two metal washers.

A

WARNING

Electrical Shock Or Personal Injury
Hazard

Disconnect electrical supply before
servicing or cleaning the unit.

Failure to do so could result In elec­

trical shock or personal injury from
cleaner suddenly starting.

eCl^ClIÀNGING'ÀNO’KCI'm^ CLSANi

TO CLEAN AGITATOR:

NOTE: In order to keep cleaning efficiency

high and to prevent damage to your vacuum,

the agitator must be cleaned every time the

belt is changed.

The agitator must also be cleaned according
to the following schedule:

Vacuum Use

HEAVY -

(used daily)

MODERATE -

(used 2-3 times/week)

LIGHT-

(used 1 time/week)

Clean Agitator

every week

every month

every 2 months

Disconnect cleaner from electrical outlet.
Check and remove hair, string and lint build­
up frequently from the Power-Mate® agitator

and end cap areas. If build-up becomes
excessive, disconnect Power-Mate® from
wand and follow the steps below.

Remove any dirt or debris in the belt path
area or in the brush roller area.

Carefully remove any string or debris locat­

ed on the agitator or end caps.

Exploded View

Agitator Assembly

Brush Unit

-End Cap

1

-Balt Pulley

17

Advertising
This manual is related to the following products: