Kenmore 116.22822 - Manual (Page 6)

A
WARNING
Etectricat Shock Hazard
DO NOT plug into electrical supply
until assembly is complete. Failure
to do so could result In electrical
shock or injury.
Before assembling vacuum, check the
PACKING LIST on the cover of the separate
Repair Parts List. Use this list to verify that
you have received all the components of
your new Kenmore vacuum.
WAND - TELESCOPING
The wand length is
adjustable and
requires no assembly.
To adjust, simply push
down on the wand .
adjust button and
slide the upper
wand to the desired
Adjust
Button
The swivel, locat­
ed on the Power­
Mate*, alloviis you
to turn the handle
to Wie left side to
reach farther
under low furni­
ture.
When adjusting
the wand length
you may have to
hold the Power­
Mate* with your
hand or foot.
Wand
Swivel
POWER-MATE'
Insert wand into Power-Mate* unfti the wand
button snaps into place.
Handle
Handle
Button
Handle
Quick
Release
Button -
Telescoping
Wand
Wand Length
: "P Adjust Button
c-ii-------- Wand
Button
'Wand Quick
Release Pedal
fSome Models)