Kenmore 116.22822 - Manual (Page 14)

Always empty the dust bin when dirt
level reaches the “MAXIMUM FILL" line.
TO REMOVE OUST BIN;
Press down on
the dust bin
release tab locat­
ed above the
handle of the dust
bin.
Puli the handle
and lift dust bin
out of the vacu­
um cleaner.
Every time dust bin is
removed, rotate
cleaning knob on top
of dust bln at least
two complete revolu­
tions to dean filter
and maintain clean­
ing performance.
TO EMPTY OUST BIN;
While holding dust bin
over a b'ash
container, remove lid
from dust bin by lifting
off.
TO CLEAN FILTER
See To Clean Filter" under FILTER
CHANGING/CLEANING.
Filter
^ Cover
Filter
Secondary
Filter
Dust Bin
Port
Before
replacing the
dust bin,
remove any
clogs that might be
located in
the dust bin port or the
secondary filter.
TO REPLACE DUSTBIN
Replace dust bin
lid assembly by
placing back on
dust bin with the
aiignment rib on
the lid aligned
with the edge on
the dust bin
Alignment
rib
Place dust bin
back into vacuum
cleaner by insert­
ing until the
dust bin release
button locks
dust bin secure*
fy in place.
14