Care and cleams, Seif~cieaning cycle – Kenmore 911.94752 User Manual
Page 23
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
CARE AND CLEAmS
Seif~Cieaning Cycle
FOR A
1. Remove the broiler pan and grid,
utensils and any foil that may be
in the oven.
2, if you oven is equipped with
nickel oven racks, they should be
removed If your oven is equipped
with gray porcelain-coated oven
racks, they may stay in the oven
during the seif-clean cycle.
Soil on the front frame and outside
the gasket on the door liner will
need to be cleaned by hand
3.
Front
Frame
Clean these areas with hot water,
soap-filled pads, or cleansers such as
Soft Scrub® to remove any soil Rinse
well with clean water and dry.
Do not use oven cleaners ™ No
commercial oven cleaner or protective
coating of any kind should be used in
or around any part of the oven
4. Wipe up any heavy spillovers on
the oven bottom,
5. Do not clean the gasket. The
fiberglass material of the oven
door gasket cannot withstand
abrasion. It is essential for the
gasket to remain intact. If you
notice it becoming worn or
frayed, it should be replaced,.
The gasket is designed to have a
5"-6“ gap at the bottom of the door.
This allows for proper air circulation
Door Pane)
Gasket
It is normal for your oven door to give
the appearance of not having a good
sea! against the range. This is due to
the gasket. The location of the gasket
on the door maintains a good seal and
prevents any heat loss
Utensils should never be
left in the oven during a
self-clean cycle.
Nickel oven racks may be
cleaned during the self-ciean
cycle, but will lose their luster
and become hard to slide. If you
choose to leave them in during
the cycle, wiping them down with
vegetable oil after the cycle will
help them slide easier.
Gray porcelain-coated oven
racks may safely be cleaned In
the oven during a self-ciean
cycle. It will be necessary to
ftfAAQA thp
tif
tHp nvAn
rack with a light coating of
vegetable oil after a clean cycle.
This will help maintain the ease
of sliding the racks in and out of
the oven.
For the first clean cycle, vent the
room with an opened window or
hood vent This will reduce the
odor when heating new parts.