Kenmore ELITE 790.7943 - Manual (Page 15)

• Oven Lockout
• Setting T emperature Display
Setting Oven Controls
OVEN
LOCKOUT Setting Oven Lockout Feature
The pad controls the Oven Lockout feature. The Oven Lockout feature automatically locks the oven door and prevents
most oven controls from being turned ON. It does not disable the clock, Timer or the interior oven light.
INSTRUCTIONS
To activate the Oven Lockout feature:
1. Press and hold for 3 seconds.
2. After 3 seconds a beep will sound, Loc will appear and "DOOR
LOCKED" will flash in the display. Once the oven door is locked
the "DOOR LOCKED" indicator will stop flashing. (See Fig. 1)
To reactivate normal oven operation:
1. Press and hold for 3 seconds. A beep will sound. Loc will
clear. The "DOOR LOCKED" will continue to flash until the oven
door has completely unlocked (See Fig. 2).
PRESS
stop ) for 3 seconds
DISPLAY
■ j n I n r
J U L U L
Fig. 1
stop ) for 3 seconds
Fig. 2
2. The oven is fully operational.
Setting Temperature Display — Fahrenheit or Celsius
The BROIL ( bt ^ and FLEX CLEAN (a^) pads control the Fahrenheit or Celsius temperature display modes. The oven
control can be programmed to display temperatures in Fahrenheit or Celsius. The oven has been preset at the factory to
displayin Fahrenheit.
INSTRUCTIONS PRESS DISPLAY
To change display from Fahrenheit to Celsius or
Celsius to Fahrenheit:
1. To tell if the display is set for Fahrenheit (F) or Celsius (C) press
(See Fig. 3) and hold for 6 seconds; "550°" will first
appear in the display and then a beep will sound. If "F"
appears, the display is set to show temperatures in Fahrenheit
(See Fig. 4). If "C" appears, the display is set to show
temperatures in Celsius (See Fig. 5).
Press to switch between Fahrenheit or Celsius display
modes. The display will show either "F" (See Fig. 4) or "C" (See
Fig. 5).
Press to accept the change or press to reject the
change.
Broil ) for 6 seconds
■ j n rrn°
■ J U D J U
Fig.3
2
.
3. START) or (STOP
Fig. 5
15