Kenmore ELITE 790.7943 - Manual (Page 17)

For the best baking performance use the PREHEAT feature. The Preheat feature will bring the oven up to the set
baking temperature and then indicate when to place the food in the oven. Preheating is not necessary when roasting or
cooking casseroles. The oven can be programmed to preheat at any temperature between 170°F to 550°F.
Setting Oven Controls
• Preheat for Electric Ranges
Setting Preheat
INSTRUCTIONS
To set the Preheat temperature for 350°F:
1. Arrange the interior oven racks.
2. Press . “350 F”, the default oven set temperature, will
appear in the display (See Fig. 1). (See BAKE instructions for
changing oven settemperature.)
3. Press ^0^. "PRE" and "BAKE" will appear in the display as
the oven heats and reaches 350°F (See Fig 2).
Note: After the oven has reached the desired temperature (this
example, 350°F) the control will sound a long beep, the "PRE" light
will turn off and oven set temperature will be displayed (Fig. 3).
When PRE disappears from the display, the oven settemperature
has been reached. Once the oven has preheated,
PLACE FOOD IN
THEOVEN.
Press when baking is complete or to cancel the Preheat
feature.
PRESS DISPLAY
■ 3ri DCri“
■nf u 3
Fig.1
30 PIPE □
Fig, 2
30 3500
Fig.3
To change Preheat temperature while oven is
preheating (example changing from 350 to 425®F):
If it is necessary to change the preheat temperature while the oven
is preheating to the original set temperature:
1. While preheating, press (§) again. (See Fig. 3)
3.
Enter the new preheat temperature. Press
"425®" will appear in the display (See Fig. 4).
Press "PRE" will appear in the display as the oven heats
to 425°F (See Fig. 5). A long beep will sound once the oven set
temperature reaches 425®F (See Fig. 6).
4. When baking is complete press
30 4ES”n
Fig. 4
30 PIPE □
Fig, 5
30 HES'D
Fig. 6
17