Self-cleaning, Press, Display – Kenmore ELITE 790.7943 User Manual
Page 30: Stopping or interrupting a self-cleaning cycle, G h oil, Instructions when the self-clean cycle is done
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Self-Cleaning
Setting Flex Clean or Delay Flex Clean
INSTRUCTIONS
When the Self-Clean cycle is done:
1. The time of day,
"HOT", "DOOR LOCKED"
and
"CLEAN"
icon
will remain in the display (See Fig. 7).
2. Once the oven has cooled down for approximately 1 FIOUR, and
the
"DOOR LOCKED"
icon is no longer displayed, the oven
door can then be opened.
PRESS
DISPLAY
' ^ G H oil
Fig.7
Stopping or Interrupting
a
Self-Cleaning cycle:
If it becomes necessary to stop or interrupt a Self-Cleaning cycle
due to excessive smoke or fire in the oven:
1. Press
2. Once the oven has cooled down for approximately 1 FIOUR and
the
"DOOR LOCKED"
icon is no longer displayed,the oven door
can then be opened (See Fig. 8).
Fig.8
IMPORTANT NOTES
when using the Self-Clean feature:
1. The Self-Clean feature will not operate whenever a radiant surface remains ON.
2. A Self-Clean cycle cannot be started if
Oven Lockout
feature is active.
3. If a Self-Cleaning-Cycle has started but notfinished and a power failure occurs, the appliance may be thoroughly
cleaned. After the door unlocks and power has been restored, set for another Self-Clean cycle.
4. If your clock is set for normal 12 hour display mode the Delay Self-Clean cycle can never be set to start more than 12
hours in advance. To set for Delay Flex-Clean 12-24 hours in advance see page 13 for instructions to set the control for the
24 hour
time
of day
display mode.
30