Troubleshooting – Kenmore ULTRAFILTER 650 625.38556 User Manual
Page 25
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Troubleshooting
Problem:
Water
leaking from faucet airgap hole.
Cause:
Drain side of faucet airgap (3/8" biack tub
ing) plugged, restricted or incorrectly con
nected to drain point.
Correction:
Inspect and eliminate restriction or piug. Refer to instaiiation
instructions for proper drain connection. See page 9.
Problem: Faucet LED indicator light does not function after battery change.
Cause:
Battery dead.
Correction:
Replace with new battery. See page 21.
Cause:
Battery installed incorrectly.
Correction:
Install battery correctly. See pages 13 or 21.
Problem:
Water leaks
at push connect fittings
Cause:
Tubing not cut square.
Correction:
Cut tubing square. See page 14.
Cause:
Tubing not pushed in aii the 'vvay.
Correction:
Push tubing in aii the way.
See
page 14.
Cause:
Tubing nicked.
Correction:
Remove tube from connection. Remove nicked portion by cutting
tube to shorter length. Re-insert in connection. See page 14.
Cause:
Outer tubing surface finish not smooth.
Correction:
Remove tube from connection. Remove problem area by cutting
tube to shorter length. Re-insert in connection. See page 14.
Questions? Call The Kenmore Water Line 1-800-426-9345 or visit KenmoreWater.com
25