Kenmore 16238 User Manual
Page 12
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
11. Assemble shelf support brackets by sliding shelf bracket (A) and Shelf bracket (B) together while paying
close attention to hole alignment, and attach the two with (2) #10 x 1/2” screws. Repeat for second set.
12. After joining shelf bracket (A) and (B), align holes
along bottom flange of brackets with corresponding holes
along top edge of casting support. Fasten with (2) #10 x
1/2” screws.
(Note: Bottom flanges on shelf support brackets should
point toward interior of grill.)
13. Attach second shelf support bracet using (2) #10 x 1/2”
screws.
12
Advertising