Kenmore 16238 User Manual
Page 21
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
30. Install Lid, Overlay, Handle, Cooking Grid, Warming Rack, Hinge Clip, and Logo.
Install lid before installing overlay, logo, and temperature gauge.
1. Install lid and hinge clip as shown.
- \
(2) # 6 wingnuts.
NOTE: Tighten wing nuts
secureiy.(Do not overtighten)
5. Install temperature
gauge.
6
. Place handle ends into handle tube as shown
Note; Notches in handle tube mate with tab
inside handle cap as shown
\
7. Then place handle assembly onto lid and
secure with washers and #10 wingnuts.
8
. Install cooking grids and warming rack as
shown.
Advertising