Kenmore 385.19005 - Manual (Page 26)

Гб' Key position adjustment
If you think the touch panel keys are out of alignment,
you can correct it in the key position adjustment window
When you press the
yes key, window (A) will be shown.
With your finger, press the black + sign as it appears in
order When you press the last black + sign, the window
(B) will be shown.
The window will close and go back to the original screen
with the new setting being registered.
C p Embroidery maximum speed
The maximum sewing speed can be changed from 400
to 650 spm for embroidery sewing
The default setting is 650 spm (stitch per minute)
Press the minus — key to reduce the maximum sewing
speed.
Press the plus + key to increase the maximum sewing
speed.
ifa Sewing light
You can turn the sewing light on or off by pressing the
sewing light key
Formatting the Memory
If the internal memory or ATA PC card does not function
due to damage of the memory bank, you need to re-enable
it by formatting the memory.
iQ) Built-in memory
To format the internal memory, press the yes key next to
bulit-in memory
<% ATA PC card
To format the ATA PC card or Compact Flash, press the
Yes key next to ATA PC card
Csi Reset all to default
Pressing the ves key will return aii settings except for
language to defaults (the same settings as when you
purchased the machine).
Language Selection
You can select one of the foilowing 3 languages by pressing
the corresponding key. To enter the language selection,
press the flag tab
(I).
i|) English
(I) French
(4) Spanish
-Key Position Adjustment
-Maximum speed set
SET
I650spi 'ГП
'' I
■ Sewing Light
±J
A7
(A) (B)
Key Por<ition Adjichmon! K(?y PoriiiOri AiljUrtimfiril
A
H
■IT
'0-
(i5^
Formal
------ Built-in Memory
- ATA PC Card
Yes)
Yesl
SET
-Reset all to defaults Yesj j
. Register j ,^I0j
J
l.gj j ,
Language Selection
English ] Frangais j Espanol
( 2 ) f3) (4l
SET
( 1)
/
Regist^
21