Square bh, Now sewing, Completed raise presser foot – Kenmore 385.19005 User Manual
Page 42
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
1
Press the start/stop button to sew the buttonhole The
buttonhole will be automatically sewn
(T) Step 1:
The machine will sew the front bartack and the left
row first. Then it goes back to the starting point with
straight stitch.
(|) Step 2:
The machine will sew the right row,
{|) Step 3:
The machine will sew the back bartack, and the
machine will stop automatically
To repeat buttonhole sewing
To sew another buttonhole, raise the presser foot and
move the fabric to where the next buttonhole is sewn, then
lower the foot and start the machine.
[s] When finished, push the buttonhole lever up as far as it
will go.
] Remove the fabric and place a pin just below the bartack
at each end to prevent accidentally cutting bartacks.
Cut opening with the seam ripper.
Use an eyelet puncher to open a keyhole buttonhole
Square BH
f 3 X l ~ 5 f
Now Sewing
(
2
)
(
3
)
Completed
Raise Presser Foot.
37