One cycle pattern sewing, Elongation sewing – Kenmore 385.19005 User Manual
Page 48
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
One Cycle Pattern Sewing
Example: patterns 20 and L.S
(i) Stitch pattern:
(ij Needle thread tension
i|j Presser foot F:
<A) Pressure dial
20, L.S
1 to 4
Satin stitch foot
3
<» To sew
Press the f * key.,
Seiect pattern 20
Select pattern L.S
Start the machine to sew.
The machine will sew to the end of the pattern and lock
the stitches, then stop automatically
Elongation Sewing
Example: pattern 20
(4) Stitch pattern:
f|) Needle thread tension
(3) Presser foot F:
(?) Pressure dial
20
1 to 4
Satin stitch foot
3
® To sew
Select pattern 20,
Press the adjust key
Press elongation + or ~ key to set the desired pattern
length,.
Note:
Elongation ratio is indicated by a multiple of the original
pattern length,.
Press the
ok
key. The setting is registered and the screen
returns to the previous window.
Start to sew
43