Kenmore 385.19005 - Manual (Page 51)

20 , 21,30
3io 4
Satin stitch foot
3
To Sew from the Beginning of a Combination
Pattern with Beginning Key
Example: patterns 20,21 and 30
CD
Stitch pattern:
(D Needle thread tension
(I) Presser foot F:
® Pressure dial
® To sew
Press the e** key.
Select pattern 20
Select pattern
21
Select pattern 30,
[T] Start to sew.
12.1 Press start/stop key in the middle of a programmed
pattern
Press the ,jj key.
[J] The entire memorized pattern shows up
You can start sewing the combination pattern from the
beginning.
m
(L) ( 2 )
!
^30 LgJ:
rri'
j s-
Hemstitch
1/2
Decorative ii ®3 DFi 3-4 ffe
1/2
Decorative !l®3 OC 3-4 (it
<|5
1/2
Individual Pattern Adjustment
Examplerpatterns 18, 20 and 21
® Stitch pattern: 18,20, 21
(|) Needle thread tension 3 to 4
(3) Presser foot F:
Satin stitch foot
(J) Pressure dial 3
You can adjust the stitch width, stitch length and elongation
ratio of each pattern in a combination individually
Q] Change the elongation ratio of pattern 18 in the
combination of patterns 18, 20 and 21
21 Press the key so the cursor will go to the pattern
you are going to change.
Press the Adjusi key
Change the elongation ratio by pressing the + or the
— key.
2 Press OK key to register the adjustment and the screen
will go back to the original window.
Start to sew.
46