Starting to sew embroidery, Sewing results – Kenmore 385.19005 User Manual
Page 63
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Ready to Sew
i®)2';'::iC2 i[i
I 54 min I 7cofois
Siffi (...... 115x110mm .
^ I
F: 126x110mm
i,1oailo\v I Pala
M
Yotiow 2i0
Pafa Sky
O'^
Joa
A-Z
Edit
starting to Sew Embroidery
Press the Pattern Selection key to select the desired
pattern.
Lower the presser foot.
Press the Start/Stop button and sew 5 to
6
stitches
Press the Start/Siop button again to stop the machine
Raise the presser foot, cut off the loose thread (Jj close
to the beginning of the starting point and lower the
presser foot
(T)
Loose thread
Press the start/stop button to start sewing again.
The machine will stop automatically when the first
color section is finished.
Change the thread and sew the next part
Sewing Results
The embroidery pattern is sewn against the centerlines on
the fabric as shown,
(|) Centerlines on the Fabric
Note:
The embroidery stitch pattern position against the
centerlines is indicated on the template sheets
58