Cobra Electronics AURA SL3 - Manual (Page 10)

Installation
Mounting
Installing your Cobra SL3 using the Windshield Suction Cup bracket
If you prefer, you can mount your SL3 to the inside of your vehicle’s windshield using the suc-
tion cup bracket provided. Simply select a position within the windshield so that the top of the
unit has a clear view of the sky, remembering that you need to connect the power connection
cable, as well as ensuring that you can read the LED display and reach the controls safely.
Follow these instructions to mount the unit in this way
• Install the suction cups onto the bracket by fitting them into its holes.
• Clean the area where you wish to position the bracket thoroughly with a glass cleaner.
• Carefully bend the bracket of the SL3 so that when it is mounted on to the windshield the
Control Panel is facing in the desired direction.
• Slide the SL3 onto the bracket until it is secure and the unit is positioned in as horizontal a
position as possible.
• To remove the SL3, simply slide the unit off the bracket from the front.
• Finally, plug the smaller plug on one end of the power cable into the socket marked DC12V
on the back off the SL3 and plug the larger plug into the cigarette lighter socket of your
vehicle. Your SL3 is now ready for use.
9