Cobra Electronics AURA SL3 - Manual (Page 7)

Nothing Comes Close to a Cobra ®
Registration and
Downloading
Introduction
Registration
IMPORTANT PLEASE READ BEFORE USING YOUR COBRA SL3!
Registering your Cobra SL3:
The database built into your Cobra SL3 is populated with the latest data available during
production. However, you will need to register your SL3 to receive your one (1) year free
database “update” subscription to the AURA™ Camera and Driving Hazard Database. Please
note that the database may not be 100% up-to-date due to the time elapsed between
production and your purchase of the SL3. Therefore it is recommended that you register your
product and periodically perform AURA database updates to ensure that your SL3 works as
effectively as possible.
Register On-line:
Go to the official AURA website http://aura.cobra.com and register on-line. Your unit and your
one (1) year free subscription to AURA will be activated immediately upon registration.
Downloading
1. First time registration: go to http://aura.cobra.com,
select the SL3 model, complete the registration form
and click “Register”.
2. Click on “Update My Data” and follow the
online instructions.
(Caution: Do not plug in the SL3 into your PC’s USB port
until the GPS data updater is installed.)
3. Once installed, proceed to launch the updater
and follow on screen instructions.
Caution: While updating your SL3, do not plug unit in
using the 12v power supply. The USB port will supply all
necessary power.
For future updates, simply plug your GPS Locator into your
PC’s USB drive for automatic update of new data.
Minimum system requirements:
• Windows ® XP or Vista.
• USB 1.1 or above.
• Access to the Internet.
NOTE: This device complies with part 15 of FCC rules: Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) This device must accept any interference received including intererence
that may cause undesired operation.
6