Cobra Electronics AURA SL3 - Manual (Page 12)

Installation
Power Connection
Caution: If you must use pliers to loosen the ring, be careful not to crush the tip. Never use
pliers or other tools to retighten the ring on the cigarette lighter plug.
2. Pull the ring straight out, then remove the metal tip, spring and old fuse.
3. Check the fuse to see if it has blown. If it has, replace it.
4. Replace the metal tip and spring inside the ring, then place the fuse inside the cigarette
lighter plug and screw the ring back onto the plug. Make sure the metal tip is visible when
you reassemble the cigarette lighter plug.
11