Cobra Electronics AURA SL3 - Manual (Page 14)

3. Adjusting the volume
The SL3 has an adjustable volume for controlling the loudness of the audible alert. To increase
the volume simply turn the volume control on the right hand side of the device, towards you. To
decrease the volume of the alert turn the volume control away from you.
4. Adding your own locations
It is possible to add your own personal locations to your SL3. To add a new location make sure
you are stationary and parked in a safe, legal manner then press the ‘MEM/DEL’ button (see
below) for approximately 2 seconds. It is possible to store up to 1,000 of your own coordinates.
When your SL3 detects one of your own co-ordinates the led display and beeper will alert you.
5. Deleting your own locations
There are two ways to delete locations you have saved and stored yourself. You can delete
them independently by pressing and holding the MEM/DEL button for approximately 2 seconds
while you are at that particular location and receiving a User Saved alert. Secondly you can
delete all your saved locations at the same time by pressing and holding the MEM/DEL button
and the MUTE/DIM button together as you power the unit up. Finally power your SL3 off and
then on again. Once a user location has been deleted it cannot be recovered except by
re-marking it.
Operating Instructions
Operation
G
PS
SA
FETY LOC
AT
O
R
OFF • 2 •
G
PS
SA
FETY LOC
AT
O
R
13