Cobra Electronics AURA SL3 - Manual (Page 8)

Installation
Mounting
Installation
Once you have performed a download it is time to install the Cobra SL3 into your vehicle. The
most important aspect of this installation is ensuring that the SL3 is positioned in such a way
that it has a clear view of the sky while ensuring that the device is situated so that it does not
interfere with the vehicle controls, jeopardize passenger or driver safety.
For best results, mount the SL3 on to the vehicles dashboard so that the top of the unit has a
clear view of the sky. When positioning your SL3 ensure that it is located in such a way that
you can easily view the LED display without having to take your eyes from the road and so
that you can reach the controls safely.
Please also be aware that you will need to be able to remove the device to perform downloads.
Once you have found a suitable location for your SL3, secure it in place with the 'Hook and Loop'
fastener or suction cup bracket provided, remembering to clean the area where the fastener or
bracket is going to be positioned to ensure a good contact.
More in depth mounting instructions are provided below.
PLEASE NOTE: Be careful to choose a location that does not block the driver’s view or
endanger the driver or passengers should your vehicle suddenly come to a stop or be involved
in an accident.
7