Cannondale S440 - Manual (Page 37)

37
Printed : 8/15/02
37
the filter hose clamps allowing fuel in the hose to
be absorbed by the towel.
5. Remove the old filter.
6. Reinstall a new, replacement filter making sure to
observe the flow indicator on the filter body.
CAUTION :
Replace the filter with the specified type.
Do not operate with the fuel filter removed.
7. Tighten the hose clamps securely.
8. Inspect the external quick connect fitting O-rings.
Replace them with new ones if you find any
swelling, tears, rips or other damage.
Coat O-rings with O-ring lubricant or clean
engine oil and reinstall into the tank fitting.
9. Make sure you press in the tab on the tank fitting
before inserting the hose end or you can tear the
O-rings.
10. Reinstall the radiator shroud and seat.
11. Check the system for any leakage before operat-
ing.
1. Fuel filter
FUEL FU
EL
FLOW FL
OW
1