Cannondale S440 - Manual (Page 99)

99
Printed : 8/15/02
99
SERVICE
Model X440 C440 E440 S440
Engine oil
Recommended viscosity: 10W40
Classification: Use only high-
detergent, premium quality
synthetic motor oils with the
American Petroleum Institute
(API) service classification SF or
SG type displayed on the
container.
Other viscosities can be used
when the average temperature
range is within the indicated
range.
Be sure to change the engine oil and clean/replace the filters in accordance with the vehicle
maintenance schedule. Service more frequently when operating under severe conditions.
Engine oil quantity (dry fill) 1500cc (1.7 US qt.)
Transmission oil 80W or 85W (Do not use hypoid gear oils)
Transmission oil quantity (dry fill) 600 cc (0.85 US qt.)
Coolant
1:1 water/anti-freeze [ethylene glycol (containing corrosion inhibitors for aluminum engines and
radiators)]
Front tire 80/100-21 120/70-17
Rear tire 110/100-19 120/100-18 160/60-17
Recommended cold tire
pressure (front/ rear)
14 psi
Main fuse 10 A
Lighting fuse 10A
Headlight 35 watt
Taillight 5 watt
Battery YUASA, YTX5L-BS maintenance-free
Fuel tank capacity 2.0 US gal (7.6 L) 2.6 US gal (9.8 L) 2.0 US gal (7.6 L)
Throttle freeplay 1/8 - 5/16 in (3 - 8 mm)
Brake fluid DOT 4 (sealed container)
Clutch oil (hydraulic) SAE 10 mineral hydraulic oil
Drive chain slack 2.2 - 2.4 inches (55 - 60 mm)
Engine idle speed 2100 - 2200 r/min
Spark plug, standard (NGK) CR9EK
Spark plug gap 0.024 - 0.028 in (0.6 - 0.7 mm)
Crankshaft position sensor gap 0.02 - 0.04 inches (0.5 - 1.0 mm)
Valve clearance
IN .006 - .008 in (0.15 -0.20 mm)
EX .013 - .015 in (0.33 - 0.38)
Fuel Premium unleaded (Anti-Knock Index 93 or higher)
Fuel filter FRAM G4164 or equivalent (35 micron rating)
TEMP
(F°)
-20 -15 -10 -5 0 5 10 15 20 25 30 35 40
-4 5 14 23 32 41 50 59 68 78 86 95 104
TEMP
(C°)
20W 50
15W 50
10W 40, 10W 50
10W 30
0W 40