Cannondale S440 - Manual (Page 79)

79
Printed : 8/15/02
79
CAUTION :
Observe the torque specification found in the
Torque Table in this manual. The forks can be
severely damaged if you over tighten them in
the clamps.
6. Inspect bolts and nuts for tightness.
7. Apply a thin film of the specified lubricant to the
inner tube. Take the vehicle off the stand, apply
the front brake, and push down on the handlebar
several times. This will spread the grease evenly
over the fork tubes and allow you to check for
smooth movement and proper fork leg operation.
Use Ohlins green grease - #148-01.
1. Upper triple clamp bolts
2. Lower triple clamp bolts
1
2