Cannondale S440 - Manual (Page 41)

41
Printed : 8/15/02
41
Pre-Ride Inspection Checklist
ITEM CHECK
Apparel
Condition of (helmet, eye protection, boots, gloves, long-sleeved shirt and long
pants).
Brakes
Check proper operation, fluid levels, front lever and rear pedal freeplay, leaks. Fill
with DOT4 brake fluid if necessary. Check front and rear pads and discs.
Chassis (frame)
Inspect the frame, subframe, and swingarm for bending, cracks, or other
damage. Don’t ride if damage is found.
Clutch Check for proper operation.
Coolant Check coolant level. Fill with coolant if necessary.
Drive
Clean and lubricate the drive chain. Check drive chain slack and condition,
sprockets, swingarm buffer, rollers, and guide block.
Engine Check oil level. Fill with engine oil if necessary
Fuel Fill with fuel. Check for leaks or damage to the fuel system.
Throttle
Check the throttle freeplay, make sure it operates properly in all handlebar posi-
tions. Closes completely when released.
Transmission Check oil level. Fill with transmission oil if necessary
Wheels/Tires
Check the wheel rims for damage, Check/regulate the tire pressure and con-
dition.
Suspension
Check the fork and rear shock compression and rebound damping settings.
Check the fasteners for tightness and re-torque if necessary. Inspect for damage
and excessive wear.
Steering
Make sure that the handlebars turn freely: no binding of the cables/hoses
throughout the full steering range (stop to stop).
Handguards
Make sure the handguards are mounted securely and that they do not interfere
with the vehicle controls. Fasten the mounting harware securely.
Panels, Bolts/Fasteners Make sure all panels are fastened securely; check fasteners for tightness.
Lights (if applicable) Check for proper operation of all vehicle lighting.