Cannondale S440 - Manual (Page 67)

67
Printed : 8/15/02
67
NOTE :
Note the fit and form of the housing as you remove
it. Later, install the housing as removed or a gap
between it and the headlight body may result. A
gap will allow water and debris to enter the inside
of the headlight causing damage.
4. Remove the bulb unit from the socket, and install
a replacement bulb.
5. Re-strap the headlight to the fork leg making
sure the strap catches are connected properly.
6. Test the headlight for proper operation.
NOTE :
You may elect to examine the overall headlight
mounting at this point. The entire headlight can be
positioned slightly higher or slightly lower on the
two fork legs. The position of the straps on the fork
legs will change the beam height. Positioning the
straps evenly on both fork legs will produce good
results with regard to beam/tilt position.
The bracket is also slotted to allow for up/down
movement.
Taillight bulb replacement
Consult the Model Specifications section of this
manual for the replacement bulb type.
1. Remove the main fuse.
2. Remove the lens screws.
3. Remove the bulb holder from the supports.
4. Inspect the inside of the bulb socket for any sign
1. Housing
2. Screws (upper bulb)
2
1
1. Lens screws
1