Fisank, Hold, Deleting a stored frequency – Uniden UBC220XLT User Manual
Page 17: Deleling a stored frequency, Bs.bsoo
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
6.
Press (D to store the entry. The channel number on
the display stops blinking.
fiSANK
18
]BS.BSOO
AIR
HOLD
7.
8
.
If that frequency is already stored in another channel,
you will hear a “beep“, and the duplicate channel
number will appear on the display.
If you want to store the frequency in the selected
channel (18) as well, press (i) again. Or, press @
and enter another frequency for the currently selected
channel. The channel number on the display slops
blinking.
Note:
Any frequency already stored in any channel
will automatically be replaced by the new one.
If you try to enter a frequency that is outside one of the
10 Bands, you will hear a “beep", and the word “Error"
appears on the display.
T
bank
Press (J) and re-enter the correct frequency.
9. To program another channel, repeat the above
procedures.
Deleting a Stored Frequency
To delete a frequency from a channel:
1.
Display the channel and frequency to be deleted.
2.
Press (T) on the numenc keypad,
3.
Press d). The current channel is erased, and the
display shows 000.000.
Note: That channel will be skipped during scanning.
15