Care and maintenance, Replacing the battery pack – Uniden UBC220XLT User Manual
Page 24
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Care and Maintenance
Replacing the Battery Pack
1. Turn the On-OffA/olume Control OFF.
2. Turn the scanner over
so you are looking at
the back.
L._ O.ZJ I
3. Press in on the ribbed
area and slide the
Battery Cover down
and off.
4. Carefully unplug the Battery Back and lift it out of the
case.
5, Carefully plug in the new Battery Pack, observing the
proper polarity, (The RED wire should be on the
right as you plug it in.) Although the plug is keyed to
reduce the chance of inserting it wrong, make sure
the wires are in the correct position before pushing it
in all the way. DO NOT FORCE THE PLUG IN,
22
Advertising