Uniden UBC220XLT - Manual (Page 9)

Front View
(Refer to the foldout illostration inside the Back Cover)
Complete explanations of the use of these keys are in the
Scanning section, page 16, and Searching section, page20.
1. LCD DISPLAY —The liquid crystal display (LCD)
shows the current channel and frequency. It also
displays the mode, status, and bank indicators.
A.
B.
F.
Memory Bank Numbers — Each Memory
Bank consists of 20 channels that you can
select or deselect during scanning operation,
using the numeric keypad. When you select a
Bank, its number appears on the display. When
you deselect a Bank, its number dis^pears
from the display. When you press @to stop
scanning, only the Bank of the current channel
appears.
Low Battery Indicator — Appears on the
display when the Battery Pack is low and needs
recharging.
Frequency Indicator — 7-digits plus decimal
indicate the frequency being received by the
scanner.
Mode Indicators — (Only /be active mode(s)
are displayed during operation.)
DATA
SCN
SRCH
PRI
HOLD
Indicates DATA SKIP activated
during SEARCH.
Indicates SCAN Mode.
Indicates SEARCH Mode. Flashes
when in TURBO SEARCH Mode.
Indicates PRIORITY SCAN Mode.
Indicates SCAN HOLD, or SEARCH
HOLD,
DLY
L/O
Indicates DELAY is activated.
Indicates the channel shown is
"Locked Out".
WX
Indicates WEATHER SCAN Mode.
I
Scan Type Indicator— Indicates BANK Scan
operation.
Channel Number — Indicates the current
channel that the scanner is on.