Kenwood TH-42A User Manual
Page 17
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
® + - E]
Displays the transmit offset direction in relation to the
receive frequency.
r-
L .
Displays the operating frequency, frequency step, Tone
frequency, and current menu settings.
Displays the current memory channel selected when
using Memory Recall.
Appears when Tone Alert is ON. Flashes when a signal
is received.
® S
Appears when Battery Saver is ON.
Appears when the selected memory channel contains
data while using Memory Store.
© ★
Appears when the selected channel or Page code is
locked-out. While memory scanning, the transceiver
does not stop on locked-out channels. During Page
operation, the squelch does not open for locked-out
codes.
While receiving, displays the relative signal strength of
received signals. While transmitting, displays the relative
battery level.
®
—
Blinks to indicate the 1 MHz step function is ON.
®
cam
Appears when the squelch is open due to a received
signal (or noise) that is greater in strength than the
squelch threshold level.
® SB
Appears when the transmit output power is set to Low
("L") or Economic Low ("EL"). Neither indicator appears
when High power is selected.
® APO
Appears when Automatic Power Off is ON.
Appears when [F] is pressed. Indicates that the
alternate function of dual function keys can be used now.
11