Kenwood TH-42A - Manual (Page 29)

RECALLING MEMORY CHANNELS MEMORY ^ VFO TRANSFERS
Using the ENC/SQL Control
1 Press [MR].
• The memory channel used last is recalled.
• if all memory channels are empty, your
transceiver beeps and Memory Recall is not
selected.
2 Turn the ENC/SQL control to select the desired
memory channel.
• Clockwise : Increases the channel number.
• Counterclockwise : Decreases the channel
number.
• Empty memory channels cannot be recalled.
Using the Keypad
1 Press [MR].
• The memory channel used last is recalled.
2 Enter a 2-digit number (00 to 39) to select the
desired memory channel.
• Empty memory channels cannot be recalled.
Note: When a split memory channel is recalled, "+ "
appears on the display to the left of the receive frequency.
Press [REV] to display the transmit frequency.
Transferring the contents of a memory channel or the
Call channel to the VFO can be useful if you wish to
search for other stations or a clear frequency near the
selected memory channel or Call channel frequency.
This is a quick operation that will be used frequently,
especially if you enjoy exploring the band.
1 Press [MR] to select Memory Recall, or [CALL] to
select the Call channel.
2 Recall the desired memory channel using the
ENC/SQL control.
• This step is not necessary if the Call channel was
selected.
3 Press [Fj, [VFO].
• The complete contents of the memory channel or
the Call channel are copied to the VFO.
• A transmit frequency from a split memory channel
or split Call channel is not transferred to the VFO.
23