Kenwood TH-42A - Manual (Page 8)

CONVENTIONS FOLLOWED IN THIS
MANUAL
The writing conventions described below have been
followed to simplify key stroke instructions and avoid
unnecessary repetition. This format is less confusing for
the reader. Reviewing the following information now will
reduce your learning period. That means less time will
be spent reading this manual; more time will be available
for operating.
Note:
► Basic procedures are numbered sequentially to guide you
step-by-step. Additional information pertaining to a step,
but not essential to complete the procedure, is provided in
bulleted form following many steps for further guidance.
^ Most procedures require that you enter a final key stroke
that acts as a terminator for the procedure. You can. if you
prefer, simply wait for approximately 70 seconds rather
than enter this final key entry.
INSTRUCTION MEANING WHAT TO DO
Press
[KEY1] + [KEY2]. Press the keys
simultaneously. Press and hold
KEY1 down, then
press KEY2.
Press
[KEY1], [KEY21. Press the keys
in sequence. Press KEY1
momentarily,
release KEY1,
then press KEY2.
Press
[KEY] + POWER ON.
Press the key
while powering
the transceiver.
With the
transceiver power
OFF, press and
hold KEY, then
turn ON the
transceiver power.
Press
IFI (1 s). Press the
Function key for
longer than 1
second.
Press and hold
the Function key
until the "F”
indicator on the
display begins
flashing.
Press
[KEY] (1 s). Press the key
for longer than
1 second.
Press and hold
KEY until the
function begins.