Kenwood TH-42A - Manual (Page 24)

UNLOCKING ENC/SQL CONTROL BEEP TONE ON/OFF
If you only want to lock the keys but not the ENC/SQL
control when Key Lock is activated, that is possible too.
1 Press [CALL] + POWER ON to select Menu Set-up.
2 Turn the ENC/SQL control to select Menu No. 06.
• The current status of ENC/SQL control lock
appears.
• The default is "OFF".
r »» »- C
coU
* *
3 Press [CALL] to select "ON" or "OFF".
• OFF: Locks ENC/SQL control with keys.
• ON : Does not lock ENC/SQL control with keys.
4 Press any key other than [CALL], [LAMP], or [MONI]
to exit Menu Set-up.
The transceiver beeps each time you press a key on the
transceiver with the exception of [MONI], [LAMP], and
[PTT]. Pressing [PTT] generates a beep if your
transmit frequency is outside the transmit band. Beep
volume can be varied by turning the PWR/VOL control.
If you prefer, you can cancel the beep for silent
operation.
1 Press [CALL]+ POWER ON to enter Menu Set-up.
2 Turn the ENC/SQL control to select Menu No. 04.
• The current beep status appears.
• The default is "ON".
3 Press [CALL] to select "OFF" or "ON".
• OFF: Disables Keypad Beep.
• ON : Enables Keypad Beep.
4 Press any key other than [CALL], [LAMP], or [MONI]
to exit Menu Set-up.
Note: When Tone Alert is switched ON while the Beep
function is OFF, an audible alarm does not sound when a
signal is received.
18