Menu set-up – Kenwood TH-42A User Manual
Page 18
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
MENU SET-UP
Many of the features on the transceiver are selected by
means of a configurable menu system. This system
reduces the number of keys and controls without
eliminating important features. To change the
configuration of a Menu item, use the following
procedure:
1 Press [CALL] + POWER ON to enter Menu Set-up.
2 Turn the ENC/SQL control to select the menu item to
be changed.
• The current selection appears.
3 Each time [CALL] is pressed, the different selections
available appear on the display.
4 Press any key other than [CALL], [LAMP], or [MONI]
to exit Menu Set-up and save the selection viewed last
on the display.
The table below lists the configurable menu items:
Menu No.
Description
Selections
Default Reference Page
01
Battery Saver
ON/OFF
ON
39
02
Automatic Power Off (APO)
ON/OFF
ON
39
03
Scan Resume:
Time-operated (TO), Carrier-operated (CO)
TO/CO
TO
36
04
Keypad Beep
ON/OFF
ON
18
05
Transmit Inhibit
ON/OFF
OFF
20
06
Tuning Encoder Lock
ON/OFF
OFF
18
07
Automatic Transmit Offset
ON/OFF
ONI
28
08
DTSS/Page Transmit delay
350 ms / 550 ms
350 ms
42 and 46
09
DTMF Transmit Hold (2 s)
ON/OFF
OFF
34
10
Open Page
ON/OFF
OFF
47
11
Auto Page Cancel
ON/OFF
OFF
47
12
Channel Display
ON/OFF
OFF
25
13
Time-out Timer (TOT)
30/60/ 90/ 180/ 900 s
900 S
19
14
Busy Frequency Lock-out
ON/OFF
OFF
20
1 TH-22AT (U.S.A. and Canada), TH-22E only
Note: While accessing Menu Set-up, waiting for longer than 10 seconds without entering any data ends the set-up operation
automatically and returns you to the previous display.
12