Crestron electronic CLW-SW1/4RF - Manual (Page 21)

Crestron CLW-SW1/4RF, -SWS1/4RF, -SLVS1RF infiNET™ Switches
Setup Lighting Window
The listed devices can be sorted in ascending or descending order by
clicking on the column headers. The order can also be adjusted by selecting
a device and clicking the or buttons. This can be used when setting up
devices in the order they will be encountered. For example, when
identifying devices in a home, an installer may want to first identify a
device by the entryway, then a device in the hallway, followed by devices in
a room.
Devices that do not need to be identified can be removed from the list by
clicking
.
NOTE: Individual devices can be set up by right-clicking the device and
selecting Setup this device. Follow the on-screen instructions to set up the
device.
8. Click Start to set up the devices in the order they appear on the list. The
first item in the list (CLW-DIM1RF, MNET ID 0D, “BR dimmer”) will be
highlighted and the upper portion of the window will indicate the type of
device.
CLW-DIM1RF Devices in Setup Mode Window; Identifying a Device
Operations Guide - DOC. 6397A infiNET Switches: Crestron CLW-SW1/4RF, -SWS1/4RF, -SLVS1RF • 17