Programming software, Earliest version software requirements for the pc – Crestron electronic CLW-SW1/4RF User Manual
Page 26
infiNET™ Switches
Crestron CLW-SW1/4RF, -SWS1/4RF, -SLVS1RF
Programming Software
Have a question or comment about Crestron software?
Answers to frequently asked questions (FAQs) can be viewed in the Online Help
section of the Crestron website. To post a question or view questions you have
submitted to Crestron’s True Blue Support, log in at
First-time users will need to establish a user account.
Earliest Version Software Requirements for the PC
NOTE: Crestron recommends that you use the latest software to take advantage of
the most recently released features. The latest software is available from the Crestron
website.
Crestron has developed an assortment of Windows
-based software tools to develop
a controlled infiNET system. You can create a program to control the control system
using the Crestron programming tools D3 Pro™ or SIMPL Windows. Customers
whose focus is on lighting systems may prefer to use the D3 Pro software since it is
designed especially for creating lighting and environmental system control
applications. Customers already familiar with SIMPL Windows who are including a
lighting system as part of an overall control system project may prefer to continue
using SIMPL Windows. The following are the minimum recommended software
versions for the PC:
Software
TASK REQUIRED
SOFTWARE VERSION
Program control system to
operate infiNET switches.
SIMPL Windows version 2.06.20 or later
with SIMPL+ Cross Compiler version 1.1 or
later and Library update 352 or later. Also
requires Crestron Database version 17.3.3
or later.
Upload program and firmware.
Crestron Toolbox 1.02.06 or later.
Program with simple wizards for
lighting and environmental
systems using infiNET switches
(optional but recommended).
Crestron D3 Pro™ version 2.0 or later
(requires SIMPL Windows, VisionTools
Pro-e, Crestron Database and Crestron
Engraver) with D3 Pro Templates version
1.0 or later. Refer to software release notes
or Crestron website for other required
Crestron software packages.
Program with simple wizards for
systems using infiNET switches
(optional but recommended).
Crestron SystemBuilder™ version 2.0 or
later (requires SIMPL Windows,
VisionTools Pro-e, Crestron Database and
Crestron Engraver) with Systembuilder
Templates version 2.01 or later. Refer to
software release notes or Crestron website
for other required Crestron software
packages.
22
• infiNET Switches: Crestron CLW-SW1/4RF, -SWS1/4RF, -SLVS1RF
Operations Guide - DOC. 6397A