Crestron electronic CLW-SW1/4RF - Manual (Page 24)

infiNET™ Switches Crestron CLW-SW1/4RF, -SWS1/4RF, -SLVS1RF
2. Open the Network Device Tree and connect to the control system to verify
that the gateway is connected to the control system and that all infiNET
devices are acquired on the gateway. infiNET devices with MNET ID 01
will be shown with a icon as shown in the following diagram.
“Network Device Tree” with Newly Added infiNET Device
3. Expand the device tree until the MNET ID that is to be changed is visible.
Right-click on the MNET ID, and when the sub-menu appears, select
Change Network ID.
“Network Device Tree” - Sub-Menu
NOTE: Any infiNET switch in the Network Device Tree can be identified
using Crestron Toolbox. Right-click a device in the Network Device Tree
and select “Identify this…”. The LED on the switch will flash HIGH. Press
a button on the switch to identify the device.
20 • infiNET Switches: Crestron CLW-SW1/4RF, -SWS1/4RF, -SLVS1RF Operations Guide - DOC. 6397A