Reference documents, Further inquiries, Future updates – Crestron electronic CLW-SW1/4RF User Manual
Page 34
infiNET™ Switches
Crestron CLW-SW1/4RF, -SWS1/4RF, -SLVS1RF
To enter the bootloader, set the mode selection switch to “OFF”. Press and hold the
up button (or Button 1 on the -SW4RF or -SWS4RF) while setting the mode
selection switch to “RUN”. The LED will blink once after five seconds to indicate
the start of Acquire mode (Acquire mode does not actually start until you release the
button). Continue holding the button for another five seconds, and the LED will flash
twice to indicate that the gateway connection will be released on the release of the
button. Continue holding the button an additional ten seconds (20 seconds in all)
until the LED flashes three times and release the button. The unit is now running the
bootloader. New firmware can now be uploaded from Crestron Toolbox.
To exit the bootloader and restore the firmware that is currently installed, cycle
power to the device by setting the mode selection switch to “OFF” and back to
“RUN” or “SET”.
Reference Documents
The latest version of all documents mentioned within the guide can be obtained from
the Crestron website (
This link will provide a list of
product manuals arranged in alphabetical order by model number.
List of Related Reference Documents
DOCUMENT TITLE
2-Series Control Systems Reference Guide
C2N-MNETGW Operations Guide
infiNET Switches Installation Guide
Further Inquiries
If you cannot locate specific information or have questions after reviewing this
guide, please take advantage of Crestron's award winning customer service team by
calling the Crestron corporate headquarters at 1-888-CRESTRON [1-888-273-7876].
For assistance in your local time zone, refer to the Crestron website
(
) for a listing of Crestron worldwide offices.
You can also log onto the online help section of the Crestron website
(
to ask questions about Crestron products.
First-time users will need to establish a user account to fully benefit from all
available features.
Future Updates
As Crestron improves functions, adds new features, and extends the capabilities of
the device, additional information may be made available as manual updates. These
updates are solely electronic and serve as intermediary supplements prior to the
release of a complete technical documentation revision.
Check the Crestron website periodically for manual update availability and its
relevance. Updates are identified as an “Addendum” in the Download column.
30
• infiNET Switches: Crestron CLW-SW1/4RF, -SWS1/4RF, -SLVS1RF
Operations Guide - DOC. 6397A