Crestron electronic CLW-SW1/4RF - Manual (Page 27)

Crestron CLW-SW1/4RF, -SWS1/4RF, -SLVS1RF infiNET™ Switches
Programming with D3 Pro
Crestron’s D3 Pro lighting software provides all the tools necessary to create a
complete Crestron lighting system for residential applications. The lighting system
includes the control system logic program, touchpanel projects and keypad
programming, documentation and real-time lighting adjustment capabilities.
As with all Crestron software, D3 Pro provides extensive right-click and drag-and-
drop functionality in addition to convenient keyboard shortcuts for frequently used
functions and commands.
Programming is organized into six system Views of the lighting system, each
providing a moveable toolbox of devices such as interfaces, fixtures and control
modules. You can add a device to your system simply by selecting it from one of the
toolboxes and dragging it to a room. The available toolboxes differ depending on the
View but all Views include a "General" toolbox that allows you to add areas and
rooms at any time.
Programming with SIMPL Windows
NOTE: While SIMPL Windows can be used to program an infiNET switch, it is
recommended to use D3 Pro software for configuring an infiNET system.
SIMPL Windows is Crestron’s premier software for programming Crestron control
systems. It is organized into two separate but equally important “Managers”.
Configuration Manager Configuration Manager is the view where programmers “build” a Crestron control
system by selecting hardware from the Device Library.
NOTE: Before adding an infiNET switch to a system, a C2N-MNETGW must first
be added.
• To incorporate an infiNET switch into the system, drag a C2N-MNETGW
from the Wireless Receivers |Wireless Receivers (RF) folder of the Device
Library and drop it in the System Views. Refer to the latest version of the
C2N-MNETGW Operations Guide (Doc. 6317) which can be downloaded
from the Crestron website.
• To add infiNET devices to the C2N-MNETGW, right click on the
C2N-MNETGW, select Add item to: “C2N-MNETGW” and select an
infiNET device as shown in the following diagram.
Adding an infiNET Device to the C2N-MNETGW
Operations Guide - DOC. 6397A infiNET Switches: Crestron CLW-SW1/4RF, -SWS1/4RF, -SLVS1RF • 23