JVC CA-V605T - Manual (Page 25)

CASSETTE DECK
Listening to tapes
You can play back type I, type II, and type IV tapes without
changing any settings.
Type I..............Normal
Type II ............High Position
Type IV........... Metal (For listening only, not recordable)
However, before you start play, you need to check the type of
the Dolby NR* system used for the tape you play. Only the
Dolby B NR is incorporated into this unit.
Listening to tapes in deck A or B
By pressing the TAPE button, you can turn on the unit,
and start playing a tape if a tape is in the deck.
Operation
1. Press EJECT for the deck you want to use.
2. Put the cassette in, with the exposed part of the tape
down.
3. Close the cassette holder gently.
4. Press C^) TAPE and the Player will start the side the
tape indicator shows.
To play a tape recorded with the Dolby NR system
Press DOLBY B NR to activate the Dolby B NR system.
To play the opposite side ofthe tape, press the i^l TAPE
button again. When the tape plays to the end, the deck
automatically stops if the Reverse Mode is noton. (See “To
play both sides repeatedly — Reverse Mode.”)
On the Player to stop during play, press ■ STOP/CANCEL.
To reverse or forward, press PREV/NEXT and the
TAPE button to start the tape playing again.
To remove the cassette, press EJECT.
Note
When cassette tapes are loaded into both deck A and B, you
can choose the deck to play by pressing the DECK
0/0 button on the front panel, or the O or ©buttons on
the remote control. Tape indicator shows you which deck will
be activated.
The DOLBY B NR indicator lights up. The system works for
both decks at the same time.
To cancel the Dolby NR system, press the button again so
that the indicator turns off.
To play both sides repeatedly — Reverse Mode
Press REVERSE MODE button so that the REVERSE MODE
indicator in the display window is lit. Reverse Mode works
for both decks at the same time.
The tape automatically reverses at the end of a side and start
playing the other side, and repeats the same process.
To cancel Reverse Mode, press the REVERSE MODE
button again so that the indicator turns to ■
Dolby noise reduction manufactured under license from
Dolby Laboratories Licensing Corporation.
“DOLBY" and the double-D symbol are trademarks of
Dolby Laboratories Licensing Corporation.
Page 21