To find the beginning of the current song, Operation, Press eject for both decks – JVC CA-V605T User Manual

Page 26: Close the cassette holders gently, To stop play, press the ■ stop/cancel button, When reverse mode is off, Locating the beginning of a song — music scan, Continuous play playing tapes in deck a and b, Fast forward/reversing tapes

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

CASSETTE DECK

Locating the beginning of a song

— Music Scan___________________

You can use Music Scan to locate the beginning of a song.
Music Scan searches for blank portions that usually separate
recorded songs, then plays the next song.

To find the beginning of the current song

During play, press

PREV/NEXT in the opposite

direction to the tape play.

Searching stops automatically at the beginning of the current

song, and the current song starts again automatically.
To find the beginning of the next song

During play, press

PREV/NEXT in the same direc­

tion as the tape play.

Searching stops automatically at the beginning of the next
song, and the next song starts automatically.

On the remote control, to locate the beginning of the current

or next song, press

buttons.

Notes

You may stop music scan and start play again by pressing

the TAPE button.

* Music Scan works by detecting a 4-second long blank

between each song, so it won’t work well in the follow­
ing cases.
• No blank at the beginning of a song.
• Noise (often caused by much use or poor quality dub­

bing) which fills the blank with noise.

• Long, very soft passages or pauses in a song.

Continuous play

Playing tapes in deck A and B_____

You can play tapes in deck A and B continuously.

Operation

1. Press EJECT for both decks.
2. Put cassettes into both decks, with the exposed part of

the tape down.

3. Close the cassette holders gently.
4. Press TAPE and the Player will start the side the

tape indicator shows.
The direction indicator starts blinking and tape play starts.
When a tape finishes playing, the unit checks to see if a

tape is in the other deck. If one is there, it automatically
starts playing it.

To stop play, press the ■ STOP/CANCEL button.

Notes

— How Continuous Play actually works —

When Reverse Mode is on;

• After the reverse side of the tape finishes playing, the tape

in the other deck starts playing. The tapes continue to play
in the sequence below.

Fast forward/Reversing tapes_____

To fast forward/reverse tapes, first press the ■ STOP/

CANCEL button and the one of the M^/^M PREV/NEXT

buttons.

□ <#% / »il

RETURN

y

NEXT //

—r^_____ /

(Front panel)

On the remote control, press the ■ STOP and then one of

the

buttons.

( )

(Remote control)

When Reverse Mode is off:

• After one side of the tape finishes playing, the tape stops.

Page 22

Advertising
This manual is related to the following products: