JVC CA-V605T - Manual (Page 35)

USING THE TIMER
There are three timers available — Recording Timer, Daily
Timer and Sleep Timer.
Before using the timers, you need to set the clock built into the
System.
Setting the clock________________
Setting the clock for the first time
After you plug the system in you need to set the clock before
you can set any of the timers.
Operation
1. Press the CLOCK button once.
Using Recording Timer
With Recording Timer, you can make a tape of a radio
broadcast automatically.
You can set Recording Timer whether the System is turned on
or off.
Operation
1. Place a tape in deck B and select the recording direc­
tion. See page 23.
2. Choose the radio station you wish to record. (The
Player will remember the station.)
3. Press the TIMER button consecutively until “ON TIME”
and “ONCE REC” blink.
2. The indicators below will start to blink.
\
\ \ I / 7^
-CLOCK/'... .
^ / I \ '< I ^
I „
/^f^^STOP^CANCE^r
fH«-/ 0<r\h
Ify PRPV \ t RETURN y /
i /
OWl
N^
3.
4.
5.
Press the ►» NEXT button to advance the hour. When
you reach the right hour press the SET button.
Press the NEXT button to advance the minutes.
When you reach the right minute press the SET button.
“CLOCK OK” will appear on the display.
Note
Holding down the !◄◄/►►) PREV/NEXT buttons will advance/
decrease the time by
10 minute intervals.
s V I / /
- ONTIME -
/ / I \ N
\ \ \ I / / /
/ / I I I V \
-TlMEn^
ONCE
- REC
4. Use the PREV/NEXT buttons to set the hour
and press SET. Then do the same for the minutes and
press SET.
5. Use the PREV/NEXT buttons to set the off time
In the same way.
6. TIMER OK will appear on the screen and the Recording
Timer is set.
To reset the timer after the System has automatically
turned off.
Turn the System on and press the timer button until ONCE
REC appears in the display, and press SET. The once record
timer is set again for the same time, and source.
Notes
• To turn off the Recording Timer, press the Timer button
until ONCE REC blinks, and press STOP/CANCEL button.
The ONCE RECORD feature is turned off.
— How Recording Timer actually works —
The System automatically turns on, tunes into the most
recent station, and starts recording on deck B when the
timer-on time comes. Then, when the timer-off time comes,
the System automatically turns off.
The timer-on time and timer-off time remain stored in
memory until you reset them or disconnect the AC power
cord.
Page 31