To connect md, dcc and dat, Connecting the power cord, Before using for the first time – JVC CA-V605T User Manual
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
BEFORE USING FOR THE FIRST TIME
To connect MD, DCC and DAT
You can connect the audio output terminals to the MD DCC IN
(PLAY) jacks, and the audio input terminals to MD DCC OUT
(REC) jacks.
Make sure to connect the wires correctly: Red to red and white
to white.
Notes
When recording onto the MD through this terminai
• You can record only audio signals of conventional CDs and
CD-Gs through this terminal.
•
It is not recommended to use the automatic marking
function of the MD player since the marking signal cannot
be recorded correctly between recorded tracks. It is prefer
able to use manual marking while recording.
Connecting the power cord
NOW, you can plug the power cord.
If the wall outlet does not match the AC plug, use the supplied
AC plug adaptor.
When the power cord is connected, the STANDBY light on the
left-hand side of the System’s front panel comes on. [See
“Overview of controls” for a description of the controls on the
System.]
Page 4