JVC TV 13140 - Manual (Page 10)

MANUAL CLOCK SETTiNG TV OPERATION
You must set the date and time manually for timer recordings, OWOFF Timer and Daylight Saving Tima if
the Auto Clock process did not set them correctty.
EXAMPLE: Setting the dock to *6:30 AM*, 23th (SAT) October, 1999.
Press the MENU button.
Press the SET + or- button to seled the SYSTEM
SET-UP option, then press the ENTER button.
SET*
Press the SET + or - button to select the CLOCK
SET option, then press the ENTER button.
SET +
0
I Un^oCCK KW OFF
iSYSliM SET^F*
(-AJENTERVEKur
To turn on the TVA/CH,
press the POWER button.
POW eb
Adjust the volume level by
presdng the VOLUME -r or -
button. The voluitte level will
be indicated on the screen by green
bar. As the volume level increases,
so do the number ol bar. If the
volume decreases, the number of
green bar also decreases.
VOLUME
Set the TV/CATV menu
option to the appropriate
position. (See page 21.)
TV - VHFrtJHF Channels
CATV - CABLE TV Channels
Press the SET + or- button
to set the month, then press
the ENTER button.
{rfJEHTEBCBCHJVEIIU)
Set the day, year and flme
as in step 3.
SET +
6'- r CLOCK SfT
UOnTH
(4MEKTE№CAACEL/U€NU>
VHFAJHF/CATV CHANNELS
TV CATV
VHF VHF
2-13 2-13
UHF std / hrc / irc
14-69 14-36
(AKW )
37-59
(AAKW W )
60-85
<AAAMZ2Z)
M nj
(66) (94)
96-99
(A-5HA-1)
100-125
(100)(125)
01
(5A)
After setting the dock, date and time^
Starts functioning automaticalty. flT'V Press the Direct Channel seJaction tHittons to select the channel.
Ef9 TV
mode direct channel aetectlon -
When the TV/CATV menu option is in the TV position, all channels can be instantly selected by using two
buttons, (for example, to select chann^ 2, press ‘D", then “2". If you press only “2", channel selection will be delayed for
a few secondsO For channels 10 and above, press the 2 digits in order. n 1 2
CATV mode direct channel aelectton - ^ ^ ^
When the TV/CATV menu option is in the CATV position, channels can be selected as toliows:
TO
SELECT CATV CHANNELS: ^ I 1 1
1 -9 Press *0" twice, then 1 -9 as needed. (Example, to select channel 2, press 002.)
ft:30AW $AT 13-99 Press the 2 digits in order. (Example, to select channel 36, press 36.)
100-125 Press the 3 digits in order. (Exarr^le, to select channel 120, press 120.)
' 'I
OHOI2
NOTE FOR CHANNELS 1-12:
If only 1 or 2 buttons are pressed, the corresponding channel will be selected in 2 seconds.
______________/
NOTE:
16
' After a power failure or disconnection of the power plug, the time di^lay will be lost. In this case, sel Ihe
present time again if the Auto Clock did not sel correctly.
' If you want to correct Ihe digits while setting, press the CANCEL button until the item you want to correct,
then press the SET+ or - button to correct the desired setting.
NOTE: • If a channel with no broadcast is selected, the sound will automatically be muted.
• If a station being viewed stops broadcasting, the TV will automatically shut itself off alter 16 minutes.
17