Tv operation, Continued) – JVC TV 13140 User Manual

Page 11

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

TV OPERATION

(CONTINUED)

MUTING

CHANNEL + AND-

SLEEP

press this button to turn off the sound. The TVA/CR's

sound will be silenced and ‘‘Ml/TING" will briefly appear
on the screen. The sound can be turned back on by
pressing this button again or one of the VOLUME + or

- buttons.

Press and release the CHANNEL + or - button. The
channel automatically stops at the next channel set
into memory. Press and hold the button down to

change channels more quickly.

For proper operation, before selecting channels, they

should be sat into the memory. See pages 21 and 22
To memorize channels'.

CALL

Press the CALL button. The clock, dale, channel number, real lime tape counter, tape speed ^d VCR

operation will be indicated.

Press CALL button again to disappear the call display.

Current time

- VCR operation

CALL

VCR operation

' ►

: Play

: Rewind

►► : Fast-forward

±

■■

Eject

#

: Recoteding

,

II:

Recoreding pause

Tape counter and

_

.

tape speed

*

°*°P

NOTE: The Auto Repeat mark appears when Auto Repeat Is selected.

_____- - — -­

To listen through the headphone, insert a headphone (not supplied) with a 1/S' mini plug into PHONES jack on the front.
The sound from the TV speaker is muted.

i:n*M jEu OIL S

12

— Channel No.

- Auto Repeat

- Cassette

To set the TVA/CR to turn oft after a preset amount of time, press the SLEEP button on the remote control.

The clock will count down 10 minutes for each press of the SLEEP button (120,110, ...10, 0). After the sleep

time is programmed, the display will appear briefly every ten minutes to remind you that the sleep timer is

operating. To confirm the sleep timer setting, press the SLEEP button and die remaining time will be momen­
tarily displayed. To cancel the sieep timer, press the SLEEP button repeatedly until the display turns to 0,

SLEEP

Pre$s this button to switch between normal TV and
the two dosed caption modes (captions and fuil
screen text). Closed captioning will display text on the
screen for hearing impaired viewers.

TV/CAP

fTEXT

ti

This button allows you to go back to the last channel
(or LINE F/R) selected by pressing the RETURN
button. Press this button again to return to the last
channel (or LINE F/R) you were watching.

RETURN

18

NOTE: • If ths station being viewed stops broadcasting, the TV will shut off after IS minutes.

• If using an indoor antenna or if TV reception is very poor, the Closed Caption Decoder text may not appear.

In this case, adjust the antenna for better reception or use an outdoor antenna.

• When activating the Closed Captioned Decoder, there will be a short delay before the Closed Captioned

text appears on the screen.

• Closed Captioned TV programs can be recorded and played back on a VCR with the Closed Captioned text

intact. The Closed Captioning text wilt disappear during Cue, Rewind and Pause modes or if the VCR
tracking is not adjusted properly.

> Closed Captktoed text Is only displayed in locations where It is available.

19

Advertising