Descrtption of controls, Remote control – JVC TV 13140 User Manual
Page 27
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
REMOTE CONTROL
10
11
12
13
14
15
16
22
23
24
25
26
DESCRtPTION OF CONTROLS
1. TIMER Button - Used to set the TV/VCR to start
recording at a preset time,
2. INPUT Selector Button - Switches the program for
viewing between the VCR and externai input sources.
3. CALL Button
- Displays the present time/day of the
week, channel, counter, speed selection (and VCR
mode if VCR is playing) on the TV screen.
4. TV/CAP/TEXT Button -
Switches between Caption,
Text and TV modes for Closed-Captioned programs.
5. REW (Rewind) Button •
In the Stop mode, this
button rapidly winds the tape backwards. In the Play
mode, this button activates reverse search.
6. REC Button -
Press once together with the PLAY
button to start normal recording. Additional presses
activate Instant Timer Recording,
7. MUTING Button
- Press to turn off the sound. Press
again to turn the sound back on.
8. CANCEL Button
- Press to cancel existing setups or
to restore default values.
9. ENTER Button -
Press to enter selected setup.
10. POWER Button - Press to turn the TVA/CR on.
Press again to turn the TVA/CR off.
11. COUNTER RESET Button - Used to reset the
counter to 00:00:00.
12. RETURN Button - Switches between the present
channel and the last channel selected.
13. FF (Fast Forward) Button - In the Stop mode, this
button rapidly winds the tape fonward. In the Play
mode, this button activates forward search.
14.
PAUSE Button - During recording, this button
temporarily stops the tape. During playback, it stops
the tape and displays a still image on the TV screen.
15. SLEEP Button -
Sets the TV to turn off automatically
after up to 120 minutes.
16.
MENU Button - Press to display the On-Screen menu
function.
17. SP/EP Selector Button -
Sets the tape speed for
recording.
‘
18. Direct Channel Selection Buttons (0-9)
- Allows
direct access to any channel.
19. Digital AUTO TRACKING Buttons
- Allows automatic
or manual adjustment of tracking to minimize picture
noise during playback,
20. STOP Button -
Press once to stop the tape.
21
. CHANNEL + / - Buttons - Press the + button to
change to a higher numbered channel set into memory.
Press the - button to change to a lower numbered
channel set into memory.
22.
PROGRAM Button - Press to confirm the programmed
timer recording and ON/OFF timer.
23.
ZERO RETURN Button - Use to stop the tape when
the counter reaches 00:00:CX).
24.
PLAY Button - Press to play a prerecorded tape.
25.
VOLUME
+ ! -
Buttons - Press the + button to
increase, or the - button to decrease the volume level.
26.
SET + / - Buttons - Used to select the option in the
menu or set timer recording, ON/OFF timer, channel
set, picture adjustment, auto repeat, clock and
language.
27