JVC TV 13140 - Manual (Page 14)

PICTURE CONTROL ADJUSTMENTS
Picture controls are factory preset but you can adjust them individually as follows:
COLOR TINT
To display the picture adjustment screen, press
the MENU button.
Press the SET + or - button to select the TV
SET-UP option, then press the ENTER button. ) SET + or - button to select the
: option, then press the ENTER button.
Press the ENTER button untii "TINT" appears on the
screen, then press the SET + or - button to adjust the
tint of the picture. This delermines how accurately the
colors are reproduced by the TV. Adjusting the tint for
natural facial tone is the best method of obtaining
accurate color reproduction of the entire picture.
Press the ENTER button until "BRIGHTNESS"
appears on the screen, then press the SET + or -
button to adjust the brightness of the picture. When
the SET
+ button is pressed, the darker portions of
the picture become lighter.
Press the ENTER button until "CONTRAST appears
on the screen, then press the SET + or - button to adjust
the contrast of the picture. Pictures look sharpest in
the daytime (bright light) by increasing the contrast. At
night (dim light), the sharpest picture is obtained by
reducing the contrast.
NOTE: The CONTRAST default
setting is set to maximum
at the factory.
Press the ENTER button until “SHARPNESS"
appears on the screen, then press the SET + or -
button to adjust the sharpness of the picture.
RESET PICTURES (CANCEL)___________
Pressing the CANCEL button white making picture
adjustments will return all adjustments to the factory
preset levels.
0
(«^ ktemance I aenu }
CANCEL
NOTE: The On-screen display will disappear 6 seconds after linishing an adjustment or by pressing the MENU
button three times. The settings can only be adjusted when they are displayed on the TV screen.
24 25