To lock the vehicle – Chrysler 2015 200 - User Guide User Manual

Page 15

Advertising
background image

To Lock The Vehicle:

The driver front door handle has the LOCK button located on the outside of the handle. With one of

the vehicle’s Keyless Enter-N-Go™ Key Fobs located outside the vehicle and within 5 ft (1.5m) of the

driver's front door handle, push the door handle LOCK button to lock all four doors and decklid.
Do NOT grab the door handle, when pushing the door handle lock button. This could unlock the

door(s).

NOTE:
• If “1st Press Of Key Fob Unlocks All Doors” is programmed all doors will unlock when you grab

hold of the driver front door handle. To select between “1st Press Of Key Fob Unlocks Driver

Door” and “1st Press Of Key Fob Unlocks All Doors,” refer to the “Uconnect® Settings” in your

vehicle’s Owner's Manual on the DVD or “Programmable Features” in this guide for further

information.

• If “1st Press Of Key Fob Unlocks All Doors” is programmed all doors and decklid will unlock

when you push the decklid button. If “1st Press Of Key Fob Unlocks Driver Door” is

programmed, only the decklid will unlock when you push the decklid button. To select

between “1st Press Of Key Fob Unlocks Driver Door” and “1st Press Of Key Fob Unlocks All

Doors,” refer to the “Uconnect® Settings” in your vehicle's Owner's Manual on the DVD or

“Programmable Features” in this guide for further information.

• After pushing the Keyless Enter-N-Go™ LOCK button, you must wait two seconds before you

can lock or unlock the vehicle using the door handle. This is done to allow you to check if the

vehicle is locked by pulling the door handle, without the vehicle reacting and unlocking.

Push The Button To Lock

Do NOT Grab The Handle When Locking

G E T T I N G S TA R T E D

13

Advertising