Jacking and tire changing, Jack location, Spare tire stowage – Chrysler 2015 200 - User Guide User Manual
Page 178: Spare tire removal, Preparations for jacking
Advertising
JACKING AND TIRE CHANGING
Jack Location
The scissor-type jack and tire changing tools are stowed under the load floor in the trunk.
Spare Tire Stowage
The compact spare tire is stowed under the rear load floor in the trunk.
Spare Tire Removal
Lift up the load floor cover and remove the hold down.
Preparations For Jacking
1. Park the vehicle on a firm, level surface as far from the edge of the roadway as possible. Avoid
icy or slippery areas.
2. Turn on the Hazard Warning flashers.
3. Set the parking brake.
4. Place the shift lever in PARK.
5. Turn OFF the ignition.
Hold Down
W H A T T O D O I N E M E R G E N C I E S
176
Advertising